Retractable Flanged Injection Quill – 150 psi or 250 psi rated

Retractable Flanged Injection Quill – 150 psi or 250 psi rated

Retractable flanged injection quills require the use of a flanged valve main connection as the isolation point that makes insertion and removal of the solution tube possible. The flanged valve takes the place of a traditional brass corporation stop. By eliminating the brass corporation stop there is no compromise in strength. Excess solution tube length creates leverage on the threads of the brass corporation stop that result in failure. A flanged injector can absorb the leverage inflicted by the solution tube when in the process flow.

These units are service rated to 150 psi or 250 psi.

Extreme CAUTION should be taken when inserting or removing any retractable injector. Temporarily reducing the system pressure is recommended; it usually allows for an easier insertion or removal.

• Stainless Steel Flanged Ball Valve
• 150# or 300# Stainless Steel Flange
• Stainless Steel Solution Tube Adaptor
• Stainless Steel Packing Nut
• 300 Series O-Ring Gasket
• Stainless Steel Restraint Hook or Dual Bolt
• Stainless Steel Limit Chain(s)